Rebar Thread Rolling Machine, Threading Machine, Bar Threading Machine

1. Should often clean and add lubricant on the slide lever and return board.

2. Clean the chip timely. (Do this work during the machine’s stop).

3. Clean the coolant every semi-month.

4. Make sure the speed reducer has adequate lubrication. Observe the oil indicator, there must be, at least 115mm from the oil surface to the bottom.

5. The machine should be maintained periodically. It includes cleaning the surface, adding lubricant,

tightening all the screws, repairing the damaged parts, etc.

6. The machine must be connected with null wire or ground wire.